Tuesday, October 22, 2019

How Homogeneous Charge Compression Ignition Works

How Homogeneous Charge Compression Ignition Works In the quest for ever-improving fuel efficiency and emissions reduction, an old and very promising idea has found new life. HCCI (Homogeneous Charge Compression Ignition) technology has been around for a long time but has recently received renewed attention and enthusiasm. While the early years saw many insurmountable (at the time) obstacles whose answers would only come as sophisticated computer controlled electronics were developed and matured into reliable technologies, progress stalled. Time has, as it always does, worked its magic and nearly every problem has been solved. HCCI is an idea whose time has come with nearly all of the parts and pieces of technology and know-how in place to make a real go of it. What is HCCI? An HCCI engine is a mix of both conventional spark-ignition and diesel compression ignition technology. The blending of these two designs offers diesel-like high efficiency without the difficult- and expensive- to deal with NOx and particulate matter emissions. In its most basic form, it simply means that fuel (gasoline or E85) is homogeneously (thoroughly and completely) mixed with air in the combustion chamber (very similar to a regular spark-ignited gasoline engine), but with a very high proportion of air to fuel (lean mixture). As the engines piston reaches its highest point (top dead center) on the compression stroke, the air/fuel mixture auto-ignites (spontaneously and completely combusts with no spark plug assist) from compression heat, much like a diesel engine. The result is the best of both worlds: low fuel usage and low emissions. How Does HCCI Work? In an HCCI engine (which is based on the four-stroke Otto cycle), fuel delivery control is of paramount importance in controlling the combustion process. On the intake stroke, fuel is injected into each cylinders combustion chamber via fuel injectors mounted directly in the cylinder head. This is achieved independently from air induction which takes place through the intake plenum. By the end of the intake stroke, fuel and air have been fully introduced and mixed in the cylinders combustion chamber. As the piston begins to move back up during the compression stroke, heat begins to build in the combustion chamber. When the piston reaches the end of this stroke, sufficient heat has accumulated to cause the fuel/air mixture to spontaneously combust (no spark is necessary) and force the piston down for the power stroke. Unlike conventional spark engines (and even diesels), the combustion process is a lean, low temperature and flameless release of energy across the entire combustion chamber. The entire fuel mixture is burned simultaneously producing equivalent power, but using much less fuel and releasing far fewer emissions in the process. At the end of the power stroke, the piston reverses direction again and initiates the exhaust stroke, but before all of the exhaust gases can be evacuated, the exhaust valves close early, trapping some of the latent combustion heat. This heat is preserved, and a small quantity of fuel is injected into the combustion chamber for a pre-charge (to help control combustion temperatures and emissions) before the next intake stroke begins. Challenges for HCCI An ongoing developmental problem with HCCI engines is controlling the combustion process. In traditional spark engines, combustion timing is easily adjusted by the engine management control module changing the spark event and perhaps fuel delivery. Its not nearly so easy with HCCIs flameless combustion. Combustion chamber temperature and mixture composition must be tightly controlled within quickly changing and very narrow thresholds that include parameters such as cylinder pressure, engine load and RPMs and throttle position, ambient air temperature extremes and atmospheric pressure changes. Most of these conditions are compensated for with sensors and automatic adjustments to otherwise normally fixed actions. Included are individual cylinder pressure sensors, variable hydraulic valve lift and electromechanical phasers for camshaft timing. The trick isnt so much as getting these systems to work as it is getting them to work together, very quickly, and over many thousands of miles an d years of wear and tear. Perhaps just as challenging though will be the problem of keeping these advanced control systems affordable. Advantages of HCCI Lean combustion returns 15 percent increase in fuel efficiency over a conventional spark ignition engine.Cleaner combustion and lower emissions (especially NOx) than a conventional spark ignition engine.Compatible with gasoline as well as E85 (ethanol) fuel.Fuel is burned quicker and at lower temperatures, reducing heat energy loss compared to a conventional spark engine.Throttleless induction system eliminates frictional pumping losses incurred in traditional (throttle body) spark engines. Disadvantages of HCCI High cylinder pressures require stronger (and more expensive) engine construction.More limited power range than a conventional spark engine.The many phases of combustion characteristics are difficult (and more expensive) to control. It is clear that HCCI technology offers superior fuel efficiency and emissions control compared to the conventional tried-and-true spark ignition gasoline engine. Whats not-so-certain yet is the ability of these engines to deliver these characteristics inexpensively, and, probably more importantly, reliably over the life of the vehicle. Continued advancements in electronic controls have brought HCCI to the precipice of workable reality, and further refinements will be necessary to push it over the edge into everyday production vehicles.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.